Where To Buy Grommet Kit
"The quality of the tool is great. It worked so well for our application and the grommets add a finished touch. Thanks again for your excellent service. I will be ordering again soon."Bill B, Stimpson 405
where to buy grommet kit
Welcome to ground zero for Rhodes restoration! This is where promises of a better playing piano are met with proven facts. Rest assured you have made the right choice and you soon will be happily rewarded by your decision.
The need for new grommets and tone bar screws is paramount to voicing and achieving the proper sustain and tone of your Rhodes piano. Grommets are at the heart of vibration and sustain of the tine and tone bar. When a grommet becomes old shrunken and hard, it loses it's natural ability to allow vibrations of the tine. In actuality, it starts to choke out the vibrations, resulting in a short ring time and or a dull tone, not to mention sloppy tone bar sway.
To aid in functionality, tone bar screws must be absolutely straight for voicing accurately and articulately. Not only must tone bar screws be straight, they must also be designed to fit correctly with the grommet. This is where the tight tolerance is most important for a proper working pair. This is where Vintage Vibe grommets and screws differ from any others on the market. We have spent dozens of man hours on R&D to make the best possible combination available.
Just like an old grommet will interfere with function, so will a new grommet that does not fit the screws properly. Anyone who sells you only grommets or anyone who tells you that you do not need to change screws, be it a technician or not, is mistaken.
Hobie Cat doubled the number of grommets across the rear of the trampoline in 1983 to reduce stress and strengthen the trampoline. This kit includes 24 spur grommets and installation tools. Buy an additional 24 grommets to do the center lacing.
Rubber grommet kit for all QR PRseries bikes (2011-present). Kit includes mechanical top tube plug, Di2 top tube plug, front derailleur mechanical plug, front derailleur Di2 grommet & rear derailleur Di2 grommet.
Flexible grommets, made of black synthetic rubber to specification MIL-G-3036. Resistant to hot oil & coolant. Used to protect tubing, wiring and control cables where they pass through bulkheads and firewalls.
This is a great kit to have. The original complete kit comes with a greater number of more common grommets which works out well. There was not a size we needed which was not present in the original kit. Replacements are easily ordered by the individual part number.
Grommets are one of the best ways to install porch enclosures or make tarps. We sell #1 1/2" grommets and #2 3/8" in both a brass and a silver nickel finish. Each Package comes with 144 Grommets and Washers. These are built for the outdoors and will not rust.
Order Comments:-Grommet sets are NON-RETURNABLE & NON-REFUNDABLE if opened.-If you are uncertain of your model, head size, etc., call us to confirm prior to ordering-For quantity available of a particular set, call us to check current stock level-If you don't see your racquet's grommet set listed, then we are either out of stock or can not get that item
Installing grommets and inserting eyelets might be scaring you off if you're not used to using hammers. On fabric! Or probably, just like me in the beginning, you have stayed away from grommets because you were afraid to ruin that pretty fabric? This post is here to show you exactly how to do it.
A grommet is a round piece of metal used to reinforce holes in fabric and other materials like leather, cork, vinyl. Most commonly used with curtains, on tents, tarps, bags, and smaller ones also on drawstring pouches. A grommet consists of two pieces: the actual grommet and a washer, and they come in various sizes.
While the terms a grommet and an eyelet are sometimes used interchangeably, there is a difference between the two. Take a look at the photo below and you'll notice that the tiny stack of hardware on the right only consists of single, identical pieces, and these are eyelets (like these). Grommets come in two pieces per set, a grommet and a washer.
The best you can do is get a grommet kit when you're installing a grommet for the first time. Why? You don't need to worry about the tool matching the size of the grommet you are about to install. I never want to add this to my list, so I usually just get a Dritz set, or one available in a local crafts store.
A grommet tool kit comes equipped with an anvil and a hole punch, a grommet setter, and of course, grommets and washers. What you see in these photos are the parts from a small set I got for myself - the anvil is the small base, it's double-sided, and the 'stick piece' is both the hole puncher and the grommet setter. These will slightly differ from manufacturer to manufacturer, but they usually come with short instructions for use.
Here you'll learn how to install grommets, it's so much easier than you'd think! Punch a hole into the fabric, place on the washer and use a hammer - done! In need to note that some manufacturers recommend using a rubber mallet but I use a regular hammer. Never had any issues, works fine!
I sometimes also use my eyelet hole punch pliers which have many size settings. But I also love that the grommet tool set comes with the pre-set sizing and I don't need to think about what size hole to make at all.
You'll want your grommet to stay in place. To prevent ripping it out, I usually add a piece of interfacing at the back of the fabric to reinforce it. For smaller projects and smaller grommets, this is as simple as a scrap piece of mid-weight fusible interfacing like Vilene H250 or fusible fleece, or something similar. Canvas works great too!
Grommets often serve a dual purpose in a project, a perfect blend of form and function. They add a certain industrial or modern look; in fact, sometimes their only job is to look cool as an embellishment. But, they usually have very defined purposes as channels, handle anchors, and more. You see grommets on garments, accessories, and certainly in plenty of home décor items.
You can use also grommets in combination with other metal finishes. In our Ribbon Flap Shoulder Bag tutorial, we used grommets to secure the base of the shoulder strap. The metal of the side grommets complimented the twist lock closure on the front flap and added a very professional finish.
A pair of grommets is a classic way to create and/or finish a drawstring channel. We used this technique in our Fleece Lined Shoe Bag as well as with small, colored eyelets for a set of Drawstring Gift Bags.
You need to accurately mark the position and spacing of each grommet. You can use a fabric marking pen that will disappear, or even a regular pencil or marker since you will be cutting out the center and covering the outer area with the actual grommet.
Once you mark the position of the grommets, you need to cut a precisely-sized hole (more on this in the steps below). Depending on the size of the grommet, that hole might be very tiny. Very sharp scissors or an Xacto knife are key to precise cutting.
Since you do have to actually hammer the grommets to secure them in place, you need a strong, sturdy work surface. Your glass coffee table would not be a good choice. A sturdy table or counter, or even the floor would be better.
said nothing about the setting of the pliers. Was all about the grommets. i have the tools and stuff but have been looking for what parts to put in the pliers to install the grommets. My search unfortunately continues.
Grommet Pliers are good for applying functional grommets to several sewing and repair projects such as shower curtains, tents, backpacks, duffel bags, garments, purses and totes. Kit includes all tools needed to apply grommets to your projects.Features:
This handheld grommet press is an invaluable tool designed to allow you to add grommets to prints and banners on the go. It is the perfect tool to add to your installer's kit for those times that additional reinforcement is required. Just line up the grommet and squeeze!
Eyelets can be confusing because sometimes very small regular grommets are referred to as eyelets, like the holes your shoelaces go through. However, in the marine industry and beyond, generally an eyelet refers to a more specific style of hardware. An eyelet is one piece of a more traditional and time-consuming method of hole reinforcement. Eyelets are used in conjunction with brass rings. First, a brass ring must be hand-sewn over a pre-punched hole in the fabric with waxed twine. Then the eyelet, which is made of a soft brass, is pressed into the center of the ring and locked in place using a setting die. The eyelet protects the twine, which is the strength of the assembly.
Eyelets and grommets each have uses where they are best suited. In general, use a plain grommet for small projects like flags, awnings, or curtains. If you need to install a large number of grommets and each will have a relatively low load, go for the spur grommets. For higher loads or at the corners of large canvas pieces or sails, use an eyelet grommet.
For use with the LG-600 Aerial Weathertight Closure. Remove the multi-port grommet set from the closure and replace with the single-port grommet set when installing a branch cable. Hardware included. 041b061a72